Stainless steel bars AISI 304/316
Stainless steel bars – a universal construction material for railing systems, industrial equipment, mechanical parts, and architectural solutions. Karuselė supplies round, square, and hexagonal bars made of AISI 304 and AISI 316 steel. Round bars are most commonly used for horizontal railings and infill; square and hexagonal bars are used for mechanical parts and industrial structures. We continuously stock the widest range of diameters in Lithuania. We have it in stock.
About stainless steel bars
Stainless steel round bars AISI 304 – the most common choice for railing systems: diameter from 8 mm to 50 mm, standard length 3 m or 6 m, cutting available. Ø 12 mm and Ø 16 mm bars are most commonly used for horizontal infills.
AISI 316 bars are recommended for pool environments, marine engineering, and chemical industry equipment where there is an increased concentration of chlorides. Square bars (5×5 mm – 50×50 mm) and hexagonal bars (S10–S50) are more often used for mechanical parts and fasteners. All bars come with EN 10060 (round) or EN 10058 (flat) compliance documents. We cut to your dimensions starting from 50 mm in length. Delivery within 1–3 working days across Lithuania.
Technical parameters
| Type | Diameters / dimensions | Standard length | Brand | Standard |
|---|---|---|---|---|
| Round | Ø 6–100 mm | 3 m / 6 m | AISI 304/316 | EN 10060 |
| Square | 5×5 – 80×80 mm | 3 m / 6 m | AISI 304/316 | EN 10058 |
| Hexagonal | S6–S80 | 3 m / 6 m | AISI 304/316 | EN 10278 |
Frequently asked questions
What diameter rods are suitable for horizontal railings?
The most common Ø 12 mm and Ø 16 mm round bars. According to the European construction code, the gap between horizontal bars in railings must not exceed 110 mm, therefore the diameter of the bars is selected based on visual effect and load.
Can I buy a piece shorter than 3 m?
Yes – we cut from 50 mm in length. The price is calculated based on length.
Are the bars polished?
Standard round bars – ground surface 2B or polished 240-grit. A higher polishing grade (320-grit, HL, mirror) is available upon request.
Do you supply with a certificate?
Yes – EN 10204 3.1 material certificate with the entire shipment.
What is the minimum order?
The minimum order is one piece cut or one rod. Discounts apply for large batches.